farm-game/jni/devil-1.7.8/config.status

#! /bin/bash
# Generated by configure.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.

debug=false
ac_cs_recheck=false
ac_cs_silent=false
SHELL=${CONFIG_SHELL-/bin/bash}
## --------------------- ##
## M4sh Initialization.  ##
## --------------------- ##

# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
  emulate sh
  NULLCMD=:
  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '${1+"$@"}'='"$@"'
  setopt NO_GLOB_SUBST
else
  case `(set -o) 2>/dev/null` in
  *posix*) set -o posix ;;
esac

fi




# PATH needs CR
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits

# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
  echo "#! /bin/sh" >conf$$.sh
  echo  "exit 0"   >>conf$$.sh
  chmod +x conf$$.sh
  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
    PATH_SEPARATOR=';'
  else
    PATH_SEPARATOR=:
  fi
  rm -f conf$$.sh
fi

# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
  as_unset=unset
else
  as_unset=false
fi


# IFS
# We need space, tab and new line, in precisely that order.  Quoting is
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
as_nl='
'
IFS=" ""	$as_nl"

# Find who we are.  Look in the path if we contain no directory separator.
case $0 in
  *[\\/]* ) as_myself=$0 ;;
  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
done
IFS=$as_save_IFS

     ;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
  as_myself=$0
fi
if test ! -f "$as_myself"; then
  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
  { (exit 1); exit 1; }
fi

# Work around bugs in pre-3.0 UWIN ksh.
for as_var in ENV MAIL MAILPATH
do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
done
PS1='$ '
PS2='> '
PS4='+ '

# NLS nuisances.
for as_var in \
  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
  LC_TELEPHONE LC_TIME
do
  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
    eval $as_var=C; export $as_var
  else
    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
  fi
done

# Required to use basename.
if expr a : '\(a\)' >/dev/null 2>&1 &&
   test "X`expr 00001 : '.*\(...\)'`" = X001; then
  as_expr=expr
else
  as_expr=false
fi

if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
  as_basename=basename
else
  as_basename=false
fi


# Name of the executable.
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
	 X"$0" : 'X\(//\)$' \| \
	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
echo X/"$0" |
    sed '/^.*\/\([^/][^/]*\)\/*$/{
	    s//\1/
	    q
	  }
	  /^X\/\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\/\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`

# CDPATH.
$as_unset CDPATH



  as_lineno_1=$LINENO
  as_lineno_2=$LINENO
  test "x$as_lineno_1" != "x$as_lineno_2" &&
  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {

  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
  # uniformly replaced by the line number.  The first 'sed' inserts a
  # line-number line after each line using $LINENO; the second 'sed'
  # does the real work.  The second script uses 'N' to pair each
  # line-number line with the line containing $LINENO, and appends
  # trailing '-' during substitution so that $LINENO is not a special
  # case at line end.
  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
  # scripts with optimization help from Paolo Bonzini.  Blame Lee
  # E. McMahon (1931-1989) for sed's syntax.  :-)
  sed -n '
    p
    /[$]LINENO/=
  ' <$as_myself |
    sed '
      s/[$]LINENO.*/&-/
      t lineno
      b
      :lineno
      N
      :loop
      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
      t loop
      s/-\n.*//
    ' >$as_me.lineno &&
  chmod +x "$as_me.lineno" ||
    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
   { (exit 1); exit 1; }; }

  # Don't try to exec as it changes $[0], causing all sort of problems
  # (the dirname of $[0] is not the place where we might find the
  # original and so on.  Autoconf is especially sensitive to this).
  . "./$as_me.lineno"
  # Exit status is that of the last command.
  exit
}


if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
  as_dirname=dirname
else
  as_dirname=false
fi

ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in
-n*)
  case `echo 'x\c'` in
  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
  *)   ECHO_C='\c';;
  esac;;
*)
  ECHO_N='-n';;
esac

if expr a : '\(a\)' >/dev/null 2>&1 &&
   test "X`expr 00001 : '.*\(...\)'`" = X001; then
  as_expr=expr
else
  as_expr=false
fi

rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
  rm -f conf$$.dir/conf$$.file
else
  rm -f conf$$.dir
  mkdir conf$$.dir
fi
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
  as_ln_s='ln -s'
  # ... but there are two gotchas:
  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
  # In both cases, we have to default to `cp -p'.
  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
    as_ln_s='cp -p'
elif ln conf$$.file conf$$ 2>/dev/null; then
  as_ln_s=ln
else
  as_ln_s='cp -p'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null

if mkdir -p . 2>/dev/null; then
  as_mkdir_p=:
else
  test -d ./-p && rmdir ./-p
  as_mkdir_p=false
fi

if test -x / >/dev/null 2>&1; then
  as_test_x='test -x'
else
  if ls -dL / >/dev/null 2>&1; then
    as_ls_L_option=L
  else
    as_ls_L_option=
  fi
  as_test_x='
    eval sh -c '\''
      if test -d "$1"; then
        test -d "$1/.";
      else
	case $1 in
        -*)set "./$1";;
	esac;
	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
	???[sx]*):;;*)false;;esac;fi
    '\'' sh
  '
fi
as_executable_p=$as_test_x

# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"

# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"


exec 6>&1

# Save the log message, to keep $[0] and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
This file was extended by DevIL $as_me 1.7.8, which was
generated by GNU Autoconf 2.61.  Invocation command line was

  CONFIG_FILES    = $CONFIG_FILES
  CONFIG_HEADERS  = $CONFIG_HEADERS
  CONFIG_LINKS    = $CONFIG_LINKS
  CONFIG_COMMANDS = $CONFIG_COMMANDS
  $ $0 $@

on `(hostname || uname -n) 2>/dev/null | sed 1q`
"

# Files that config.status was made for.
config_files=" Makefile lib/Makefile bin/Makefile test/Makefile docs/Makefile data/Makefile data/IL.pc data/ILU.pc data/ILUT.pc test/format_test/format_checks.sh"
config_headers=" include/IL/config.h"
config_commands=" libtool depfiles"

ac_cs_usage="\
\`$as_me' instantiates files from templates according to the
current configuration.

Usage: $0 [OPTIONS] [FILE]...

  -h, --help       print this help, then exit
  -V, --version    print version number and configuration settings, then exit
  -q, --quiet      do not print progress messages
  -d, --debug      don't remove temporary files
      --recheck    update $as_me by reconfiguring in the same conditions
  --file=FILE[:TEMPLATE]
		   instantiate the configuration file FILE
  --header=FILE[:TEMPLATE]
		   instantiate the configuration header FILE

Configuration files:
$config_files

Configuration headers:
$config_headers

Configuration commands:
$config_commands

Report bugs to <bug-autoconf@gnu.org>."

ac_cs_version="\
DevIL config.status 1.7.8
configured by ./configure, generated by GNU Autoconf 2.61,
  with options \"\"

Copyright (C) 2006 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."

ac_pwd='/home/hagish/workspace/adt/love-native-android/jni/devil-1.7.8'
srcdir='.'
INSTALL='/usr/bin/install -c'
MKDIR_P='/bin/mkdir -p'
# If no file are specified by the user, then we need to provide default
# value.  By we need to know if files were specified by the user.
ac_need_defaults=:
while test $# != 0
do
  case $1 in
  --*=*)
    ac_option=`expr "X$1" : 'X\([^=]*\)='`
    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
    ac_shift=:
    ;;
  *)
    ac_option=$1
    ac_optarg=$2
    ac_shift=shift
    ;;
  esac

  case $ac_option in
  # Handling of the options.
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    ac_cs_recheck=: ;;
  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
    echo "$ac_cs_version"; exit ;;
  --debug | --debu | --deb | --de | --d | -d )
    debug=: ;;
  --file | --fil | --fi | --f )
    $ac_shift
    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
    ac_need_defaults=false;;
  --header | --heade | --head | --hea )
    $ac_shift
    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
    ac_need_defaults=false;;
  --he | --h)
    # Conflict between --help and --header
    { echo "$as_me: error: ambiguous option: $1
Try \`$0 --help' for more information." >&2
   { (exit 1); exit 1; }; };;
  --help | --hel | -h )
    echo "$ac_cs_usage"; exit ;;
  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil | --si | --s)
    ac_cs_silent=: ;;

  # This is an error.
  -*) { echo "$as_me: error: unrecognized option: $1
Try \`$0 --help' for more information." >&2
   { (exit 1); exit 1; }; } ;;

  *) ac_config_targets="$ac_config_targets $1"
     ac_need_defaults=false ;;

  esac
  shift
done

ac_configure_extra_args=

if $ac_cs_silent; then
  exec 6>/dev/null
  ac_configure_extra_args="$ac_configure_extra_args --silent"
fi

if $ac_cs_recheck; then
  echo "running CONFIG_SHELL=/bin/bash /bin/bash ./configure " $ac_configure_extra_args " --no-create --no-recursion" >&6
  CONFIG_SHELL=/bin/bash
  export CONFIG_SHELL
  exec /bin/bash "./configure" $ac_configure_extra_args --no-create --no-recursion
fi

exec 5>>config.log
{
  echo
  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
## Running $as_me. ##
_ASBOX
  echo "$ac_log"
} >&5

#
# INIT-COMMANDS
#


# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH

sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
double_quote_subst='s/\(["`\\]\)/\\\1/g'
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
macro_version='2.2.4'
macro_revision='1.2976'
enable_shared='yes'
enable_static='yes'
pic_mode='default'
enable_fast_install='yes'
host_alias=''
host='i686-pc-linux-gnu'
host_os='linux-gnu'
build_alias=''
build='i686-pc-linux-gnu'
build_os='linux-gnu'
SED='/bin/sed'
Xsed='/bin/sed -e 1s/^X//'
GREP='/bin/grep'
EGREP='/bin/grep -E'
FGREP='/bin/grep -F'
LD='/usr/bin/ld'
NM='/usr/bin/nm -B'
LN_S='ln -s'
max_cmd_len='1572864'
ac_objext='o'
exeext=''
lt_unset='unset'
lt_SP2NL='tr \040 \012'
lt_NL2SP='tr \015\012 \040\040'
reload_flag=' -r'
reload_cmds='$LD$reload_flag -o $output$reload_objs'
deplibs_check_method='pass_all'
file_magic_cmd='$MAGIC_CMD'
AR='ar'
AR_FLAGS='cru'
STRIP='strip'
RANLIB='ranlib'
old_postinstall_cmds='chmod 644 $oldlib~$RANLIB $oldlib'
old_postuninstall_cmds=''
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs~$RANLIB $oldlib'
CC='gcc'
CFLAGS='-g -O2'
compiler='g++'
GCC='yes'
lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[	 ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[	 ][	 ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'''
lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\'''
lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/  {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/  {"\2", (void *) \&\2},/p'\'''
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \([^ ]*\) $/  {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \(lib[^ ]*\)$/  {"\2", (void *) \&\2},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/  {"lib\2", (void *) \&\2},/p'\'''
objdir='.libs'
SHELL='/bin/bash'
ECHO='echo'
MAGIC_CMD='file'
lt_prog_compiler_no_builtin_flag=' -fno-builtin'
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic=' -fPIC -DPIC'
lt_prog_compiler_static='-static'
lt_cv_prog_compiler_c_o='yes'
need_locks='no'
DSYMUTIL=''
NMEDIT=''
LIPO=''
OTOOL=''
OTOOL64=''
libext='a'
shrext_cmds='.so'
extract_expsyms_cmds=''
archive_cmds_need_lc='no'
enable_shared_with_static_runtimes='no'
export_dynamic_flag_spec='${wl}--export-dynamic'
whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
compiler_needs_object='no'
old_archive_from_new_cmds=''
old_archive_from_expsyms_cmds=''
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
	    echo "local: *; };" >> $output_objdir/$libname.ver~
	    $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
module_cmds=''
module_expsym_cmds=''
with_gnu_ld='yes'
allow_undefined_flag=''
no_undefined_flag=''
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_flag_spec_ld=''
hardcode_libdir_separator=''
hardcode_direct='no'
hardcode_direct_absolute='no'
hardcode_minus_L='no'
hardcode_shlibpath_var='unsupported'
hardcode_automatic='no'
inherit_rpath='no'
link_all_deplibs='unknown'
fix_srcfile_path=''
always_export_symbols='no'
export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
include_expsyms=''
prelink_cmds=''
file_list_spec=''
variables_saved_for_relink='PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH'
need_lib_prefix='no'
need_version='no'
version_type='linux'
runpath_var='LD_RUN_PATH'
shlibpath_var='LD_LIBRARY_PATH'
shlibpath_overrides_runpath='no'
libname_spec='lib$name'
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
postinstall_cmds=''
postuninstall_cmds=''
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
finish_eval=''
hardcode_into_libs='yes'
sys_lib_search_path_spec='/usr/lib/i386-linux-gnu/gcc/i686-linux-gnu/4.5.2 /usr/lib/i386-linux-gnu /lib /usr/lib'
sys_lib_dlsearch_path_spec='/lib /usr/lib /usr/lib/mesa /lib/i386-linux-gnu /usr/lib/i386-linux-gnu /lib/i686-linux-gnu /usr/lib/i686-linux-gnu /usr/lib/alsa-lib /usr/local/lib '
hardcode_action='immediate'
enable_dlopen='unknown'
enable_dlopen_self='unknown'
enable_dlopen_self_static='unknown'
old_striplib='strip --strip-debug'
striplib='strip --strip-unneeded'
AS='as'
DLLTOOL='dlltool'
OBJDUMP='objdump'
compiler_lib_search_dirs=''
predep_objects=''
postdep_objects=''
predeps=''
postdeps=''
compiler_lib_search_path=''
LD_CXX='/usr/bin/ld'
old_archive_cmds_CXX='$AR $AR_FLAGS $oldlib$oldobjs~$RANLIB $oldlib'
compiler_CXX='g++'
GCC_CXX='yes'
lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
lt_prog_compiler_wl_CXX='-Wl,'
lt_prog_compiler_pic_CXX=' -fPIC -DPIC'
lt_prog_compiler_static_CXX='-static'
lt_cv_prog_compiler_c_o_CXX='yes'
archive_cmds_need_lc_CXX='no'
enable_shared_with_static_runtimes_CXX='no'
export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
compiler_needs_object_CXX='no'
old_archive_from_new_cmds_CXX=''
old_archive_from_expsyms_cmds_CXX=''
archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
module_cmds_CXX=''
module_expsym_cmds_CXX=''
with_gnu_ld_CXX='yes'
allow_undefined_flag_CXX=''
no_undefined_flag_CXX=''
hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
hardcode_libdir_flag_spec_ld_CXX=''
hardcode_libdir_separator_CXX=''
hardcode_direct_CXX='no'
hardcode_direct_absolute_CXX='no'
hardcode_minus_L_CXX='no'
hardcode_shlibpath_var_CXX='unsupported'
hardcode_automatic_CXX='no'
inherit_rpath_CXX='no'
link_all_deplibs_CXX='no'
fix_srcfile_path_CXX=''
always_export_symbols_CXX='no'
export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
include_expsyms_CXX=''
prelink_cmds_CXX=''
file_list_spec_CXX=''
hardcode_action_CXX='immediate'
compiler_lib_search_dirs_CXX='/usr/lib/i386-linux-gnu/gcc/i686-linux-gnu/4.5.2 /usr/lib/i386-linux-gnu/gcc/i686-linux-gnu/4.5.2/../../.. /usr/lib/i386-linux-gnu'
predep_objects_CXX='/usr/lib/i386-linux-gnu/gcc/i686-linux-gnu/4.5.2/../../../crti.o /usr/lib/i386-linux-gnu/gcc/i686-linux-gnu/4.5.2/crtbeginS.o'
postdep_objects_CXX='/usr/lib/i386-linux-gnu/gcc/i686-linux-gnu/4.5.2/crtendS.o /usr/lib/i386-linux-gnu/gcc/i686-linux-gnu/4.5.2/../../../crtn.o'
predeps_CXX=''
postdeps_CXX='-lstdc++ -lm -lgcc_s -lc -lgcc_s'
compiler_lib_search_path_CXX='-L/usr/lib/i386-linux-gnu/gcc/i686-linux-gnu/4.5.2 -L/usr/lib/i386-linux-gnu/gcc/i686-linux-gnu/4.5.2/../../.. -L/usr/lib/i386-linux-gnu'

LTCC='gcc'
LTCFLAGS='-g -O2'
compiler='gcc'

# Quote evaled strings.
for var in SED GREP EGREP FGREP LD NM LN_S lt_SP2NL lt_NL2SP reload_flag deplibs_check_method file_magic_cmd AR AR_FLAGS STRIP RANLIB CC CFLAGS compiler lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl lt_cv_sys_global_symbol_to_c_name_address lt_cv_sys_global_symbol_to_c_name_address_lib_prefix SHELL ECHO lt_prog_compiler_no_builtin_flag lt_prog_compiler_wl lt_prog_compiler_pic lt_prog_compiler_static lt_cv_prog_compiler_c_o need_locks DSYMUTIL NMEDIT LIPO OTOOL OTOOL64 shrext_cmds export_dynamic_flag_spec whole_archive_flag_spec compiler_needs_object with_gnu_ld allow_undefined_flag no_undefined_flag hardcode_libdir_flag_spec hardcode_libdir_flag_spec_ld hardcode_libdir_separator fix_srcfile_path exclude_expsyms include_expsyms file_list_spec variables_saved_for_relink libname_spec library_names_spec soname_spec finish_eval old_striplib striplib compiler_lib_search_dirs predep_objects postdep_objects predeps postdeps compiler_lib_search_path LD_CXX compiler_CXX lt_prog_compiler_no_builtin_flag_CXX lt_prog_compiler_wl_CXX lt_prog_compiler_pic_CXX lt_prog_compiler_static_CXX lt_cv_prog_compiler_c_o_CXX export_dynamic_flag_spec_CXX whole_archive_flag_spec_CXX compiler_needs_object_CXX with_gnu_ld_CXX allow_undefined_flag_CXX no_undefined_flag_CXX hardcode_libdir_flag_spec_CXX hardcode_libdir_flag_spec_ld_CXX hardcode_libdir_separator_CXX fix_srcfile_path_CXX exclude_expsyms_CXX include_expsyms_CXX file_list_spec_CXX compiler_lib_search_dirs_CXX predep_objects_CXX postdep_objects_CXX predeps_CXX postdeps_CXX compiler_lib_search_path_CXX; do
    case `eval \\$ECHO "X\\$$var"` in
    *[\\\`\"\$]*)
      eval "lt_$var=\\\"\`\$ECHO \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
      ;;
    *)
      eval "lt_$var=\\\"\$$var\\\""
      ;;
    esac
done

# Double-quote double-evaled strings.
for var in reload_cmds old_postinstall_cmds old_postuninstall_cmds old_archive_cmds extract_expsyms_cmds old_archive_from_new_cmds old_archive_from_expsyms_cmds archive_cmds archive_expsym_cmds module_cmds module_expsym_cmds export_symbols_cmds prelink_cmds postinstall_cmds postuninstall_cmds finish_cmds sys_lib_search_path_spec sys_lib_dlsearch_path_spec old_archive_cmds_CXX old_archive_from_new_cmds_CXX old_archive_from_expsyms_cmds_CXX archive_cmds_CXX archive_expsym_cmds_CXX module_cmds_CXX module_expsym_cmds_CXX export_symbols_cmds_CXX prelink_cmds_CXX; do
    case `eval \\$ECHO "X\\$$var"` in
    *[\\\`\"\$]*)
      eval "lt_$var=\\\"\`\$ECHO \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
      ;;
    *)
      eval "lt_$var=\\\"\$$var\\\""
      ;;
    esac
done

# Fix-up fallback echo if it was mangled by the above quoting rules.
case $lt_ECHO in
*'\$0 --fallback-echo"')  lt_ECHO=`$ECHO "X$lt_ECHO" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
  ;;
esac

ac_aux_dir='build-aux'
xsi_shell='yes'
lt_shell_append='yes'

# See if we are running on zsh, and set the options which allow our
# commands through without removal of \ escapes INIT.
if test -n "${ZSH_VERSION+set}" ; then
   setopt NO_GLOB_SUBST
fi


    PACKAGE='devil'
    VERSION='1.7.8'
    TIMESTAMP=''
    RM='rm -f'
    ofile='libtool'





AMDEP_TRUE="" ac_aux_dir="build-aux"


# Handling of arguments.
for ac_config_target in $ac_config_targets
do
  case $ac_config_target in
    "include/IL/config.h") CONFIG_HEADERS="$CONFIG_HEADERS include/IL/config.h" ;;
    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
    "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
    "bin/Makefile") CONFIG_FILES="$CONFIG_FILES bin/Makefile" ;;
    "test/Makefile") CONFIG_FILES="$CONFIG_FILES test/Makefile" ;;
    "docs/Makefile") CONFIG_FILES="$CONFIG_FILES docs/Makefile" ;;
    "data/Makefile") CONFIG_FILES="$CONFIG_FILES data/Makefile" ;;
    "data/IL.pc") CONFIG_FILES="$CONFIG_FILES data/IL.pc" ;;
    "data/ILU.pc") CONFIG_FILES="$CONFIG_FILES data/ILU.pc" ;;
    "data/ILUT.pc") CONFIG_FILES="$CONFIG_FILES data/ILUT.pc" ;;
    "test/format_test/format_checks.sh") CONFIG_FILES="$CONFIG_FILES test/format_test/format_checks.sh" ;;

  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
   { (exit 1); exit 1; }; };;
  esac
done


# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used.  Set only those that are not.
# We use the long form for the default assignment because of an extremely
# bizarre bug on SunOS 4.1.3.
if $ac_need_defaults; then
  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
fi

# Have a temporary directory for convenience.  Make it in the build tree
# simply because there is no reason against having it here, and in addition,
# creating and moving files from /tmp can sometimes cause problems.
# Hook for its removal unless debugging.
# Note that there is a small window in which the directory will not be cleaned:
# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
  tmp=
  trap 'exit_status=$?
  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
' 0
  trap '{ (exit 1); exit 1; }' 1 2 13 15
}
# Create a (secure) tmp directory for tmp files.

{
  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
  test -n "$tmp" && test -d "$tmp"
}  ||
{
  tmp=./conf$$-$RANDOM
  (umask 077 && mkdir "$tmp")
} ||
{
   echo "$me: cannot create a temporary directory in ." >&2
   { (exit 1); exit 1; }
}

#
# Set up the sed scripts for CONFIG_FILES section.
#

# No need to generate the scripts if there are no CONFIG_FILES.
# This happens for instance when ./config.status config.h
if test -n "$CONFIG_FILES"; then

cat >"$tmp/subs-1.sed" <<\CEOF
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s,@SHELL@,|#_!!_#|/bin/bash,g
s,@PATH_SEPARATOR@,|#_!!_#|:,g
s,@PACKAGE_NAME@,|#_!!_#|DevIL,g
s,@PACKAGE_TARNAME@,|#_!!_#|devil,g
s,@PACKAGE_VERSION@,|#_!!_#|1.7.8,g
s,@PACKAGE_STRING@,|#_!!_#|DevIL 1.7.8,g
s,@PACKAGE_BUGREPORT@,|#_!!_#|bubla@|#_!!_#|users.sourceforge.net,g
s,@exec_prefix@,|#_!!_#|${prefix},g
s,@prefix@,|#_!!_#|/usr/local,g
s,@program_transform_name@,|#_!!_#|s\,x\,x\,,g
s,@bindir@,|#_!!_#|${exec_prefix}/bin,g
s,@sbindir@,|#_!!_#|${exec_prefix}/sbin,g
s,@libexecdir@,|#_!!_#|${exec_prefix}/libexec,g
s,@datarootdir@,|#_!!_#|${prefix}/share,g
s,@datadir@,|#_!!_#|${datarootdir},g
s,@sysconfdir@,|#_!!_#|${prefix}/etc,g
s,@sharedstatedir@,|#_!!_#|${prefix}/com,g
s,@localstatedir@,|#_!!_#|${prefix}/var,g
s,@includedir@,|#_!!_#|${prefix}/include,g
s,@oldincludedir@,|#_!!_#|/usr/include,g
s,@docdir@,|#_!!_#|${datarootdir}/doc/${PACKAGE_TARNAME},g
s,@infodir@,|#_!!_#|${datarootdir}/info,g
s,@htmldir@,|#_!!_#|${docdir},g
s,@dvidir@,|#_!!_#|${docdir},g
s,@pdfdir@,|#_!!_#|${docdir},g
s,@psdir@,|#_!!_#|${docdir},g
s,@libdir@,|#_!!_#|${exec_prefix}/lib,g
s,@localedir@,|#_!!_#|${datarootdir}/locale,g
s,@mandir@,|#_!!_#|${datarootdir}/man,g
s,@DEFS@,|#_!!_#|-DHAVE_CONFIG_H,g
s,@ECHO_C@,|#_!!_#|,g
s,@ECHO_N@,|#_!!_#|-n,g
s,@ECHO_T@,|#_!!_#|,g
s,@LIBS@,|#_!!_#|-lm -lz ,g
s,@build_alias@,|#_!!_#|,g
s,@host_alias@,|#_!!_#|,g
s,@target_alias@,|#_!!_#|,g
s,@LIBTOOL@,|#_!!_#|$(SHELL) $(top_builddir)/libtool,g
s,@build@,|#_!!_#|i686-pc-linux-gnu,g
s,@build_cpu@,|#_!!_#|i686,g
s,@build_vendor@,|#_!!_#|pc,g
s,@build_os@,|#_!!_#|linux-gnu,g
s,@host@,|#_!!_#|i686-pc-linux-gnu,g
s,@host_cpu@,|#_!!_#|i686,g
s,@host_vendor@,|#_!!_#|pc,g
s,@host_os@,|#_!!_#|linux-gnu,g
s,@CC@,|#_!!_#|gcc,g
s,@CFLAGS@,|#_!!_#|-g -O2,g
s,@LDFLAGS@,|#_!!_#|,g
s,@CPPFLAGS@,|#_!!_#|,g
s,@ac_ct_CC@,|#_!!_#|gcc,g
s,@EXEEXT@,|#_!!_#|,g
s,@OBJEXT@,|#_!!_#|o,g
s,@SED@,|#_!!_#|/bin/sed,g
s,@GREP@,|#_!!_#|/bin/grep,g
s,@EGREP@,|#_!!_#|/bin/grep -E,g
s,@FGREP@,|#_!!_#|/bin/grep -F,g
s,@LD@,|#_!!_#|/usr/bin/ld,g
s,@DUMPBIN@,|#_!!_#|,g
s,@ac_ct_DUMPBIN@,|#_!!_#|,g
s,@NM@,|#_!!_#|/usr/bin/nm -B,g
s,@LN_S@,|#_!!_#|ln -s,g
s,@AR@,|#_!!_#|ar,g
s,@STRIP@,|#_!!_#|strip,g
s,@RANLIB@,|#_!!_#|ranlib,g
s,@lt_ECHO@,|#_!!_#|echo,g
s,@DSYMUTIL@,|#_!!_#|,g
s,@NMEDIT@,|#_!!_#|,g
s,@LIPO@,|#_!!_#|,g
s,@OTOOL@,|#_!!_#|,g
s,@OTOOL64@,|#_!!_#|,g
s,@CPP@,|#_!!_#|gcc -E,g
s,@AS@,|#_!!_#|as,g
s,@DLLTOOL@,|#_!!_#|dlltool,g
s,@OBJDUMP@,|#_!!_#|objdump,g
s,@INSTALL_PROGRAM@,|#_!!_#|${INSTALL},g
s,@INSTALL_SCRIPT@,|#_!!_#|${INSTALL},g
s,@INSTALL_DATA@,|#_!!_#|${INSTALL} -m 644,g
s,@am__isrc@,|#_!!_#|,g
s,@CYGPATH_W@,|#_!!_#|echo,g
s,@PACKAGE@,|#_!!_#|devil,g
s,@VERSION@,|#_!!_#|1.7.8,g
s,@ACLOCAL@,|#_!!_#|${SHELL} /home/hagish/workspace/adt/love-native-android/jni/devil-1.7.8/build-aux/missing --run aclocal-1.10,g
s,@AUTOCONF@,|#_!!_#|${SHELL} /home/hagish/workspace/adt/love-native-android/jni/devil-1.7.8/build-aux/missing --run autoconf,g
s,@AUTOMAKE@,|#_!!_#|${SHELL} /home/hagish/workspace/adt/love-native-android/jni/devil-1.7.8/build-aux/missing --run automake-1.10,g
s,@AUTOHEADER@,|#_!!_#|${SHELL} /home/hagish/workspace/adt/love-native-android/jni/devil-1.7.8/build-aux/missing --run autoheader,g
s,@MAKEINFO@,|#_!!_#|${SHELL} /home/hagish/workspace/adt/love-native-android/jni/devil-1.7.8/build-aux/missing --run makeinfo,g
s,@install_sh@,|#_!!_#|$(SHELL) /home/hagish/workspace/adt/love-native-android/jni/devil-1.7.8/build-aux/install-sh,g
s,@INSTALL_STRIP_PROGRAM@,|#_!!_#|$(install_sh) -c -s,g
s,@mkdir_p@,|#_!!_#|/bin/mkdir -p,g
s,@AWK@,|#_!!_#|gawk,g
s,@SET_MAKE@,|#_!!_#|,g
s,@am__leading_dot@,|#_!!_#|.,g
s,@AMTAR@,|#_!!_#|${SHELL} /home/hagish/workspace/adt/love-native-android/jni/devil-1.7.8/build-aux/missing --run tar,g
s,@am__tar@,|#_!!_#|${AMTAR} chof - "$$tardir",g
s,@am__untar@,|#_!!_#|${AMTAR} xf -,g
s,@DEPDIR@,|#_!!_#|.deps,g
CEOF
cat >"$tmp/subs-2.sed" <<\CEOF
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
s,@am__include@,|#_!!_#|include,g
s,@am__quote@,|#_!!_#|,g
s,@AMDEP_TRUE@,|#_!!_#|,g
s,@AMDEP_FALSE@,|#_!!_#|#,g
s,@AMDEPBACKSLASH@,|#_!!_#|\\,g
s,@CCDEPMODE@,|#_!!_#|depmode=gcc3,g
s,@am__fastdepCC_TRUE@,|#_!!_#|,g
s,@am__fastdepCC_FALSE@,|#_!!_#|#,g
s,@DEVIL_LTVERSION@,|#_!!_#|2:0:1,g
s,@CXX@,|#_!!_#|g++,g
s,@CXXFLAGS@,|#_!!_#|-O3,g
s,@ac_ct_CXX@,|#_!!_#|g++,g
s,@CXXDEPMODE@,|#_!!_#|depmode=gcc3,g
s,@am__fastdepCXX_TRUE@,|#_!!_#|,g
s,@am__fastdepCXX_FALSE@,|#_!!_#|#,g
s,@CXXCPP@,|#_!!_#|g++ -E,g
s,@BUILD_EXAMPLES_TRUE@,|#_!!_#|#,g
s,@BUILD_EXAMPLES_FALSE@,|#_!!_#|,g
s,@BUILD_IL_TRUE@,|#_!!_#|,g
s,@BUILD_IL_FALSE@,|#_!!_#|#,g
s,@BUILD_ILU_TRUE@,|#_!!_#|#,g
s,@BUILD_ILU_FALSE@,|#_!!_#|,g
s,@BUILD_ILUT_TRUE@,|#_!!_#|#,g
s,@BUILD_ILUT_FALSE@,|#_!!_#|,g
s,@PKG_CONFIG@,|#_!!_#|/usr/bin/pkg-config,g
s,@OPENEXR_CFLAGS@,|#_!!_#|,g
s,@OPENEXR_LIBS@,|#_!!_#|,g
s,@ALLEGRO_CONFIG@,|#_!!_#|,g
s,@allegro_CFLAGS@,|#_!!_#|,g
s,@allegro_LIBS@,|#_!!_#|,g
s,@XMKMF@,|#_!!_#|,g
s,@acx_pthread_config@,|#_!!_#|,g
s,@PTHREAD_CC@,|#_!!_#|gcc,g
s,@PTHREAD_LIBS@,|#_!!_#|,g
s,@PTHREAD_CFLAGS@,|#_!!_#|-pthread,g
s,@GL_CFLAGS@,|#_!!_#|,g
s,@GL_LIBS@,|#_!!_#|,g
s,@GLU_CFLAGS@,|#_!!_#|,g
s,@GLU_LIBS@,|#_!!_#|,g
s,@X_CFLAGS@,|#_!!_#|,g
s,@X_PRE_LIBS@,|#_!!_#|,g
s,@X_LIBS@,|#_!!_#|,g
s,@X_EXTRA_LIBS@,|#_!!_#|,g
s,@GLUT_CFLAGS@,|#_!!_#|,g
s,@GLUT_LIBS@,|#_!!_#|,g
s,@SDL_CONFIG@,|#_!!_#|,g
s,@SDL_CFLAGS@,|#_!!_#|,g
s,@SDL_LIBS@,|#_!!_#|,g
s,@USE_ALLEGRO_TRUE@,|#_!!_#|#,g
s,@USE_ALLEGRO_FALSE@,|#_!!_#|,g
s,@USE_DIRECTX8_TRUE@,|#_!!_#|#,g
s,@USE_DIRECTX8_FALSE@,|#_!!_#|,g
s,@USE_DIRECTX9_TRUE@,|#_!!_#|#,g
s,@USE_DIRECTX9_FALSE@,|#_!!_#|,g
s,@USE_DIRECTX_TRUE@,|#_!!_#|#,g
s,@USE_DIRECTX_FALSE@,|#_!!_#|,g
s,@USE_OPENGL_TRUE@,|#_!!_#|#,g
s,@USE_OPENGL_FALSE@,|#_!!_#|,g
s,@HAVE_GLUT_TRUE@,|#_!!_#|#,g
s,@HAVE_GLUT_FALSE@,|#_!!_#|,g
s,@USE_SDL_TRUE@,|#_!!_#|#,g
s,@USE_SDL_FALSE@,|#_!!_#|,g
s,@USE_W32_TRUE@,|#_!!_#|#,g
s,@USE_W32_FALSE@,|#_!!_#|,g
s,@USE_X11_TRUE@,|#_!!_#|#,g
s,@USE_X11_FALSE@,|#_!!_#|,g
s,@PLATFORM@,|#_!!_#|,g
s,@WINDOWS_BUILD_TRUE@,|#_!!_#|#,g
s,@WINDOWS_BUILD_FALSE@,|#_!!_#|,g
s,@GENERAL_CFLAGS@,|#_!!_#| -msse -msse2 -msse3,g
s,@IL_CFLAGS@,|#_!!_#| ,g
s,@IL_LIBS@,|#_!!_#|-ltiff -lpng12 -lmng -llcms -ljasper -ljpeg  ,g
s,@ILU_CFLAGS@,|#_!!_#|,g
s,@ILU_LIBS@,|#_!!_#|,g
s,@ILUT_CFLAGS@,|#_!!_#|,g
s,@ILUT_LIBS@,|#_!!_#|,g
s,@LIBILUT_WIN32LIBPATH@,|#_!!_#|,g
s,@SUPPORTED_FORMATS@,|#_!!_#| BLP BMP DCX DDS DICOM WAD FITS GIF HDR ICNS ICON IFF ILBM IWI JPG JP2 LCMS LIF MDL MNG MP3 PCX PCD PIC PIX PNG PNM PSD PSP PXR RAW ROT SGI SUN TEXTURE TGA TIF TPL UTX VTF WAL WBMP WDP XPM,g
s,@LIBOBJS@,|#_!!_#|,g
s,@LTLIBOBJS@,|#_!!_#|,g
:end
s/|#_!!_#|//g
CEOF
fi # test -n "$CONFIG_FILES"


for ac_tag in  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS
do
  case $ac_tag in
  :[FHLC]) ac_mode=$ac_tag; continue;;
  esac
  case $ac_mode$ac_tag in
  :[FHL]*:*);;
  :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
echo "$as_me: error: Invalid tag $ac_tag." >&2;}
   { (exit 1); exit 1; }; };;
  :[FH]-) ac_tag=-:-;;
  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
  esac
  ac_save_IFS=$IFS
  IFS=:
  set x $ac_tag
  IFS=$ac_save_IFS
  shift
  ac_file=$1
  shift

  case $ac_mode in
  :L) ac_source=$1;;
  :[FH])
    ac_file_inputs=
    for ac_f
    do
      case $ac_f in
      -) ac_f="$tmp/stdin";;
      *) # Look for the file first in the build tree, then in the source tree
	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
	 # because $ac_f cannot contain `:'.
	 test -f "$ac_f" ||
	   case $ac_f in
	   [\\/$]*) false;;
	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
	   esac ||
	   { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
echo "$as_me: error: cannot find input file: $ac_f" >&2;}
   { (exit 1); exit 1; }; };;
      esac
      ac_file_inputs="$ac_file_inputs $ac_f"
    done

    # Let's still pretend it is `configure' which instantiates (i.e., don't
    # use $as_me), people would be surprised to read:
    #    /* config.h.  Generated by config.status.  */
    configure_input="Generated from "`IFS=:
	  echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
    if test x"$ac_file" != x-; then
      configure_input="$ac_file.  $configure_input"
      { echo "$as_me:$LINENO: creating $ac_file" >&5
echo "$as_me: creating $ac_file" >&6;}
    fi

    case $ac_tag in
    *:-:* | *:-) cat >"$tmp/stdin";;
    esac
    ;;
  esac

  ac_dir=`$as_dirname -- "$ac_file" ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$ac_file" : 'X\(//\)[^/]' \| \
	 X"$ac_file" : 'X\(//\)$' \| \
	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$ac_file" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
  { as_dir="$ac_dir"
  case $as_dir in #(
  -*) as_dir=./$as_dir;;
  esac
  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
    as_dirs=
    while :; do
      case $as_dir in #(
      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
      *) as_qdir=$as_dir;;
      esac
      as_dirs="'$as_qdir' $as_dirs"
      as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
      test -d "$as_dir" && break
    done
    test -z "$as_dirs" || eval "mkdir $as_dirs"
  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
echo "$as_me: error: cannot create directory $as_dir" >&2;}
   { (exit 1); exit 1; }; }; }
  ac_builddir=.

case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
  # A ".." for each directory in $ac_dir_suffix.
  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
  case $ac_top_builddir_sub in
  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
  esac ;;
esac
ac_abs_top_builddir=$ac_pwd
ac_abs_builddir=$ac_pwd$ac_dir_suffix
# for backward compatibility:
ac_top_builddir=$ac_top_build_prefix

case $srcdir in
  .)  # We are building in place.
    ac_srcdir=.
    ac_top_srcdir=$ac_top_builddir_sub
    ac_abs_top_srcdir=$ac_pwd ;;
  [\\/]* | ?:[\\/]* )  # Absolute name.
    ac_srcdir=$srcdir$ac_dir_suffix;
    ac_top_srcdir=$srcdir
    ac_abs_top_srcdir=$srcdir ;;
  *) # Relative name.
    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_top_build_prefix$srcdir
    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix


  case $ac_mode in
  :F)
  #
  # CONFIG_FILE
  #

  case $INSTALL in
  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
  esac
  ac_MKDIR_P=$MKDIR_P
  case $MKDIR_P in
  [\\/$]* | ?:[\\/]* ) ;;
  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
  esac
# If the template does not know about datarootdir, expand it.
# FIXME: This hack should be removed a few years after 2.60.
ac_datarootdir_hack=; ac_datarootdir_seen=

case `sed -n '/datarootdir/ {
  p
  q
}
/@datadir@/p
/@docdir@/p
/@infodir@/p
/@localedir@/p
/@mandir@/p
' $ac_file_inputs` in
*datarootdir*) ac_datarootdir_seen=yes;;
*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
  { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
  ac_datarootdir_hack='
  s&@datadir@&${datarootdir}&g
  s&@docdir@&${datarootdir}/doc/${PACKAGE_TARNAME}&g
  s&@infodir@&${datarootdir}/info&g
  s&@localedir@&${datarootdir}/locale&g
  s&@mandir@&${datarootdir}/man&g
    s&\${datarootdir}&${prefix}/share&g' ;;
esac
  sed "/^[	 ]*VPATH[	 ]*=/{
s/:*\$(srcdir):*/:/
s/:*\${srcdir}:*/:/
s/:*@srcdir@:*/:/
s/^\([^=]*=[	 ]*\):*/\1/
s/:*$//
s/^[^=]*=[	 ]*$//
}

:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s&@configure_input@&$configure_input&;t t
s&@top_builddir@&$ac_top_builddir_sub&;t t
s&@srcdir@&$ac_srcdir&;t t
s&@abs_srcdir@&$ac_abs_srcdir&;t t
s&@top_srcdir@&$ac_top_srcdir&;t t
s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
s&@builddir@&$ac_builddir&;t t
s&@abs_builddir@&$ac_abs_builddir&;t t
s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
s&@MKDIR_P@&$ac_MKDIR_P&;t t
$ac_datarootdir_hack
" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out

test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
  { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined.  Please make sure it is defined." >&5
echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined.  Please make sure it is defined." >&2;}

  rm -f "$tmp/stdin"
  case $ac_file in
  -) cat "$tmp/out"; rm -f "$tmp/out";;
  *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
  esac
 ;;
  :H)
  #
  # CONFIG_HEADER
  #
    # First, check the format of the line:
    cat >"$tmp/defines.sed" <<\CEOF
/^[	 ]*#[	 ]*undef[	 ][	 ]*[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*[	 ]*$/b def
/^[	 ]*#[	 ]*define[	 ][	 ]*[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*[(	 ]/b def
b
:def
s/$/ /
s,^\([	 #]*\)[^	 ]*\([	 ]*PACKAGE_NAME\)[	 (].*,\1define\2 "DevIL" ,
s,^\([	 #]*\)[^	 ]*\([	 ]*PACKAGE_TARNAME\)[	 (].*,\1define\2 "devil" ,
s,^\([	 #]*\)[^	 ]*\([	 ]*PACKAGE_VERSION\)[	 (].*,\1define\2 "1.7.8" ,
s,^\([	 #]*\)[^	 ]*\([	 ]*PACKAGE_STRING\)[	 (].*,\1define\2 "DevIL 1.7.8" ,
s,^\([	 #]*\)[^	 ]*\([	 ]*PACKAGE_BUGREPORT\)[	 (].*,\1define\2 "bubla@users.sourceforge.net" ,
s,^\([	 #]*\)[^	 ]*\([	 ]*STDC_HEADERS\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_SYS_TYPES_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_SYS_STAT_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_STDLIB_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_STRING_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_MEMORY_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_STRINGS_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_INTTYPES_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_STDINT_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_UNISTD_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_DLFCN_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*LT_OBJDIR\)[	 (].*,\1define\2 ".libs/" ,
s,^\([	 #]*\)[^	 ]*\([	 ]*PACKAGE\)[	 (].*,\1define\2 "devil" ,
s,^\([	 #]*\)[^	 ]*\([	 ]*VERSION\)[	 (].*,\1define\2 "1.7.8" ,
s,^\([	 #]*\)[^	 ]*\([	 ]*SSE\)[	 (].*,\1define\2  ,
s,^\([	 #]*\)[^	 ]*\([	 ]*VECTORMEM\)[	 (].*,\1define\2  ,
s,^\([	 #]*\)[^	 ]*\([	 ]*SSE2\)[	 (].*,\1define\2  ,
s,^\([	 #]*\)[^	 ]*\([	 ]*VECTORMEM\)[	 (].*,\1define\2  ,
s,^\([	 #]*\)[^	 ]*\([	 ]*SSE3\)[	 (].*,\1define\2  ,
s,^\([	 #]*\)[^	 ]*\([	 ]*VECTORMEM\)[	 (].*,\1define\2  ,
s,^\([	 #]*\)[^	 ]*\([	 ]*GCC_X86_ASM\)[	 (].*,\1define\2  ,
s,^\([	 #]*\)[^	 ]*\([	 ]*IL_INLINE_ASM\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*VALLOC\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*POSIX_MEMALIGN\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*MEMALIGN\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*MM_MALLOC\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_LIBZ\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_LIBM\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*IL_NO_EXR\)[	 (].*,\1define\2  ,
s,^\([	 #]*\)[^	 ]*\([	 ]*IL_USE_JPEGLIB_UNMODIFIED\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*LCMS_NODIRINCLUDE\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_PTHREAD\)[	 (].*,\1define\2 1 ,
s/ $//
s,^[	 #]*u.*,/* & */,
CEOF
    sed -f "$tmp/defines.sed" $ac_file_inputs >"$tmp/out1"
ac_result="$tmp/out1"
  if test x"$ac_file" != x-; then
    echo "/* $configure_input  */" >"$tmp/config.h"
    cat "$ac_result" >>"$tmp/config.h"
    if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then
      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
echo "$as_me: $ac_file is unchanged" >&6;}
    else
      rm -f $ac_file
      mv "$tmp/config.h" $ac_file
    fi
  else
    echo "/* $configure_input  */"
    cat "$ac_result"
  fi
  rm -f "$tmp/out12"
# Compute $ac_file's index in $config_headers.
_am_arg=$ac_file
_am_stamp_count=1
for _am_header in $config_headers :; do
  case $_am_header in
    $_am_arg | $_am_arg:* )
      break ;;
    * )
      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
  esac
done
echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$_am_arg" : 'X\(//\)[^/]' \| \
	 X"$_am_arg" : 'X\(//\)$' \| \
	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$_am_arg" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`/stamp-h$_am_stamp_count
 ;;

  :C)  { echo "$as_me:$LINENO: executing $ac_file commands" >&5
echo "$as_me: executing $ac_file commands" >&6;}
 ;;
  esac


  case $ac_file$ac_mode in
    "libtool":C)

    # See if we are running on zsh, and set the options which allow our
    # commands through without removal of \ escapes.
    if test -n "${ZSH_VERSION+set}" ; then
      setopt NO_GLOB_SUBST
    fi

    cfgfile="${ofile}T"
    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
    $RM "$cfgfile"

    cat <<_LT_EOF >> "$cfgfile"
#! $SHELL

# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
#                 2006, 2007, 2008 Free Software Foundation, Inc.
#   Written by Gordon Matzigkeit, 1996
#
#   This file is part of GNU Libtool.
#
# GNU Libtool is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# As a special exception to the GNU General Public License,
# if you distribute this file as part of a program or library that
# is built using GNU Libtool, you may include this file under the
# same distribution terms that you use for the rest of that program.
#
# GNU Libtool is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GNU Libtool; see the file COPYING.  If not, a copy
# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
# obtained by writing to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.


# The names of the tagged configurations supported by this script.
available_tags="CXX "

# ### BEGIN LIBTOOL CONFIG

# Which release of libtool.m4 was used?
macro_version=$macro_version
macro_revision=$macro_revision

# Whether or not to build shared libraries.
build_libtool_libs=$enable_shared

# Whether or not to build static libraries.
build_old_libs=$enable_static

# What type of objects to build.
pic_mode=$pic_mode

# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install

# The host system.
host_alias=$host_alias
host=$host
host_os=$host_os

# The build system.
build_alias=$build_alias
build=$build
build_os=$build_os

# A sed program that does not truncate output.
SED=$lt_SED

# Sed that helps us avoid accidentally triggering echo(1) options like -n.
Xsed="\$SED -e 1s/^X//"

# A grep program that handles long lines.
GREP=$lt_GREP

# An ERE matcher.
EGREP=$lt_EGREP

# A literal string matcher.
FGREP=$lt_FGREP

# A BSD- or MS-compatible name lister.
NM=$lt_NM

# Whether we need soft or hard links.
LN_S=$lt_LN_S

# What is the maximum length of a command?
max_cmd_len=$max_cmd_len

# Object file suffix (normally "o").
objext=$ac_objext

# Executable file suffix (normally "").
exeext=$exeext

# whether the shell understands "unset".
lt_unset=$lt_unset

# turn spaces into newlines.
SP2NL=$lt_lt_SP2NL

# turn newlines into spaces.
NL2SP=$lt_lt_NL2SP

# How to create reloadable object files.
reload_flag=$lt_reload_flag
reload_cmds=$lt_reload_cmds

# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method

# Command to use when deplibs_check_method == "file_magic".
file_magic_cmd=$lt_file_magic_cmd

# The archiver.
AR=$lt_AR
AR_FLAGS=$lt_AR_FLAGS

# A symbol stripping program.
STRIP=$lt_STRIP

# Commands used to install an old-style archive.
RANLIB=$lt_RANLIB
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds

# A C compiler.
LTCC=$lt_CC

# LTCC compiler flags.
LTCFLAGS=$lt_CFLAGS

# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe

# Transform the output of nm in a proper C declaration.
global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl

# Transform the output of nm in a C name address pair.
global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address

# Transform the output of nm in a C name address pair when lib prefix is needed.
global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix

# The name of the directory that contains temporary libtool files.
objdir=$objdir

# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL

# An echo program that does not interpret backslashes.
ECHO=$lt_ECHO

# Used to examine libraries when file_magic_cmd begins with "file".
MAGIC_CMD=$MAGIC_CMD

# Must we lock files when doing compilation?
need_locks=$lt_need_locks

# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
DSYMUTIL=$lt_DSYMUTIL

# Tool to change global to local symbols on Mac OS X.
NMEDIT=$lt_NMEDIT

# Tool to manipulate fat objects and archives on Mac OS X.
LIPO=$lt_LIPO

# ldd/readelf like tool for Mach-O binaries on Mac OS X.
OTOOL=$lt_OTOOL

# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
OTOOL64=$lt_OTOOL64

# Old archive suffix (normally "a").
libext=$libext

# Shared library suffix (normally ".so").
shrext_cmds=$lt_shrext_cmds

# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=$lt_extract_expsyms_cmds

# Variables whose values should be saved in libtool wrapper scripts and
# restored at link time.
variables_saved_for_relink=$lt_variables_saved_for_relink

# Do we need the "lib" prefix for modules?
need_lib_prefix=$need_lib_prefix

# Do we need a version for libraries?
need_version=$need_version

# Library versioning type.
version_type=$version_type

# Shared library runtime path variable.
runpath_var=$runpath_var

# Shared library path variable.
shlibpath_var=$shlibpath_var

# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=$shlibpath_overrides_runpath

# Format of library name prefix.
libname_spec=$lt_libname_spec

# List of archive names.  First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME
library_names_spec=$lt_library_names_spec

# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec

# Command to use after installation of a shared archive.
postinstall_cmds=$lt_postinstall_cmds

# Command to use after uninstallation of a shared archive.
postuninstall_cmds=$lt_postuninstall_cmds

# Commands used to finish a libtool library installation in a directory.
finish_cmds=$lt_finish_cmds

# As "finish_cmds", except a single script fragment to be evaled but
# not shown.
finish_eval=$lt_finish_eval

# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs

# Compile-time system search path for libraries.
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec

# Run-time system search path for libraries.
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec

# Whether dlopen is supported.
dlopen_support=$enable_dlopen

# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self

# Whether dlopen of statically linked programs is supported.
dlopen_self_static=$enable_dlopen_self_static

# Commands to strip libraries.
old_striplib=$lt_old_striplib
striplib=$lt_striplib

# Assembler program.
AS=$AS

# DLL creation program.
DLLTOOL=$DLLTOOL

# Object dumper program.
OBJDUMP=$OBJDUMP


# The linker used to build libraries.
LD=$lt_LD

# Commands used to build an old-style archive.
old_archive_cmds=$lt_old_archive_cmds

# A language specific compiler.
CC=$lt_compiler

# Is the compiler the GNU compiler?
with_gcc=$GCC

# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag

# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl

# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic

# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static

# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o

# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$archive_cmds_need_lc

# Whether or not to disallow shared libs when runtime libs are static.
allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes

# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec

# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec

# Whether the compiler copes with passing no objects directly.
compiler_needs_object=$lt_compiler_needs_object

# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds

# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds

# Commands used to build a shared archive.
archive_cmds=$lt_archive_cmds
archive_expsym_cmds=$lt_archive_expsym_cmds

# Commands used to build a loadable module if different from building
# a shared archive.
module_cmds=$lt_module_cmds
module_expsym_cmds=$lt_module_expsym_cmds

# Whether we are building with GNU ld or not.
with_gnu_ld=$lt_with_gnu_ld

# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag

# Flag that enforces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag

# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec

# If ld is used when linking, flag to hardcode \$libdir into a binary
# during linking.  This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld

# Whether we need a single "-rpath" flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator

# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
# DIR into the resulting binary.
hardcode_direct=$hardcode_direct

# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
# DIR into the resulting binary and the resulting library dependency is
# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
# library is relocated.
hardcode_direct_absolute=$hardcode_direct_absolute

# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
# into the resulting binary.
hardcode_minus_L=$hardcode_minus_L

# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
# into the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var

# Set to "yes" if building a shared library automatically hardcodes DIR
# into the library and all subsequent libraries and executables linked
# against it.
hardcode_automatic=$hardcode_automatic

# Set to yes if linker adds runtime paths of dependent libraries
# to runtime path list.
inherit_rpath=$inherit_rpath

# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs

# Fix the shell variable \$srcfile for the compiler.
fix_srcfile_path=$lt_fix_srcfile_path

# Set to "yes" if exported symbols are required.
always_export_symbols=$always_export_symbols

# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds

# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms

# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms

# Commands necessary for linking programs (against libraries) with templates.
prelink_cmds=$lt_prelink_cmds

# Specify filename containing input files.
file_list_spec=$lt_file_list_spec

# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action

# The directories searched by this compiler when creating a shared library.
compiler_lib_search_dirs=$lt_compiler_lib_search_dirs

# Dependencies to place before and after the objects being linked to
# create a shared library.
predep_objects=$lt_predep_objects
postdep_objects=$lt_postdep_objects
predeps=$lt_predeps
postdeps=$lt_postdeps

# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=$lt_compiler_lib_search_path

# ### END LIBTOOL CONFIG

_LT_EOF

  case $host_os in
  aix3*)
    cat <<\_LT_EOF >> "$cfgfile"
# AIX sometimes has problems with the GCC collect2 program.  For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test "X${COLLECT_NAMES+set}" != Xset; then
  COLLECT_NAMES=
  export COLLECT_NAMES
fi
_LT_EOF
    ;;
  esac


ltmain="$ac_aux_dir/ltmain.sh"


  # We use sed instead of cat because bash on DJGPP gets confused if
  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
  # text mode, it properly converts lines to CR/LF.  This bash problem
  # is reportedly fixed, but why not run on old versions too?
  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
    || (rm -f "$cfgfile"; exit 1)

  case $xsi_shell in
  yes)
    cat << \_LT_EOF >> "$cfgfile"

# func_dirname file append nondir_replacement
# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
# otherwise set result to NONDIR_REPLACEMENT.
func_dirname ()
{
  case ${1} in
    */*) func_dirname_result="${1%/*}${2}" ;;
    *  ) func_dirname_result="${3}" ;;
  esac
}

# func_basename file
func_basename ()
{
  func_basename_result="${1##*/}"
}

# func_dirname_and_basename file append nondir_replacement
# perform func_basename and func_dirname in a single function
# call:
#   dirname:  Compute the dirname of FILE.  If nonempty,
#             add APPEND to the result, otherwise set result
#             to NONDIR_REPLACEMENT.
#             value returned in "$func_dirname_result"
#   basename: Compute filename of FILE.
#             value retuned in "$func_basename_result"
# Implementation must be kept synchronized with func_dirname
# and func_basename. For efficiency, we do not delegate to
# those functions but instead duplicate the functionality here.
func_dirname_and_basename ()
{
  case ${1} in
    */*) func_dirname_result="${1%/*}${2}" ;;
    *  ) func_dirname_result="${3}" ;;
  esac
  func_basename_result="${1##*/}"
}

# func_stripname prefix suffix name
# strip PREFIX and SUFFIX off of NAME.
# PREFIX and SUFFIX must not contain globbing or regex special
# characters, hashes, percent signs, but SUFFIX may contain a leading
# dot (in which case that matches only a dot).
func_stripname ()
{
  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
  # positional parameters, so assign one to ordinary parameter first.
  func_stripname_result=${3}
  func_stripname_result=${func_stripname_result#"${1}"}
  func_stripname_result=${func_stripname_result%"${2}"}
}

# func_opt_split
func_opt_split ()
{
  func_opt_split_opt=${1%%=*}
  func_opt_split_arg=${1#*=}
}

# func_lo2o object
func_lo2o ()
{
  case ${1} in
    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
    *)    func_lo2o_result=${1} ;;
  esac
}

# func_xform libobj-or-source
func_xform ()
{
  func_xform_result=${1%.*}.lo
}

# func_arith arithmetic-term...
func_arith ()
{
  func_arith_result=$(( $* ))
}

# func_len string
# STRING may not start with a hyphen.
func_len ()
{
  func_len_result=${#1}
}

_LT_EOF
    ;;
  *) # Bourne compatible functions.
    cat << \_LT_EOF >> "$cfgfile"

# func_dirname file append nondir_replacement
# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
# otherwise set result to NONDIR_REPLACEMENT.
func_dirname ()
{
  # Extract subdirectory from the argument.
  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
  if test "X$func_dirname_result" = "X${1}"; then
    func_dirname_result="${3}"
  else
    func_dirname_result="$func_dirname_result${2}"
  fi
}

# func_basename file
func_basename ()
{
  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
}


# func_stripname prefix suffix name
# strip PREFIX and SUFFIX off of NAME.
# PREFIX and SUFFIX must not contain globbing or regex special
# characters, hashes, percent signs, but SUFFIX may contain a leading
# dot (in which case that matches only a dot).
# func_strip_suffix prefix name
func_stripname ()
{
  case ${2} in
    .*) func_stripname_result=`$ECHO "X${3}" \
           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
    *)  func_stripname_result=`$ECHO "X${3}" \
           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
  esac
}

# sed scripts:
my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
my_sed_long_arg='1s/^-[^=]*=//'

# func_opt_split
func_opt_split ()
{
  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
}

# func_lo2o object
func_lo2o ()
{
  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
}

# func_xform libobj-or-source
func_xform ()
{
  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'`
}

# func_arith arithmetic-term...
func_arith ()
{
  func_arith_result=`expr "$@"`
}

# func_len string
# STRING may not start with a hyphen.
func_len ()
{
  func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
}

_LT_EOF
esac

case $lt_shell_append in
  yes)
    cat << \_LT_EOF >> "$cfgfile"

# func_append var value
# Append VALUE to the end of shell variable VAR.
func_append ()
{
  eval "$1+=\$2"
}
_LT_EOF
    ;;
  *)
    cat << \_LT_EOF >> "$cfgfile"

# func_append var value
# Append VALUE to the end of shell variable VAR.
func_append ()
{
  eval "$1=\$$1\$2"
}

_LT_EOF
    ;;
  esac


  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
    || (rm -f "$cfgfile"; exit 1)

  mv -f "$cfgfile" "$ofile" ||
    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
  chmod +x "$ofile"


    cat <<_LT_EOF >> "$ofile"

# ### BEGIN LIBTOOL TAG CONFIG: CXX

# The linker used to build libraries.
LD=$lt_LD_CXX

# Commands used to build an old-style archive.
old_archive_cmds=$lt_old_archive_cmds_CXX

# A language specific compiler.
CC=$lt_compiler_CXX

# Is the compiler the GNU compiler?
with_gcc=$GCC_CXX

# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX

# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl_CXX

# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic_CXX

# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static_CXX

# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX

# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$archive_cmds_need_lc_CXX

# Whether or not to disallow shared libs when runtime libs are static.
allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX

# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX

# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX

# Whether the compiler copes with passing no objects directly.
compiler_needs_object=$lt_compiler_needs_object_CXX

# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX

# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX

# Commands used to build a shared archive.
archive_cmds=$lt_archive_cmds_CXX
archive_expsym_cmds=$lt_archive_expsym_cmds_CXX

# Commands used to build a loadable module if different from building
# a shared archive.
module_cmds=$lt_module_cmds_CXX
module_expsym_cmds=$lt_module_expsym_cmds_CXX

# Whether we are building with GNU ld or not.
with_gnu_ld=$lt_with_gnu_ld_CXX

# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag_CXX

# Flag that enforces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag_CXX

# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX

# If ld is used when linking, flag to hardcode \$libdir into a binary
# during linking.  This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX

# Whether we need a single "-rpath" flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX

# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
# DIR into the resulting binary.
hardcode_direct=$hardcode_direct_CXX

# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
# DIR into the resulting binary and the resulting library dependency is
# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
# library is relocated.
hardcode_direct_absolute=$hardcode_direct_absolute_CXX

# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
# into the resulting binary.
hardcode_minus_L=$hardcode_minus_L_CXX

# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
# into the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX

# Set to "yes" if building a shared library automatically hardcodes DIR
# into the library and all subsequent libraries and executables linked
# against it.
hardcode_automatic=$hardcode_automatic_CXX

# Set to yes if linker adds runtime paths of dependent libraries
# to runtime path list.
inherit_rpath=$inherit_rpath_CXX

# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs_CXX

# Fix the shell variable \$srcfile for the compiler.
fix_srcfile_path=$lt_fix_srcfile_path_CXX

# Set to "yes" if exported symbols are required.
always_export_symbols=$always_export_symbols_CXX

# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds_CXX

# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms_CXX

# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms_CXX

# Commands necessary for linking programs (against libraries) with templates.
prelink_cmds=$lt_prelink_cmds_CXX

# Specify filename containing input files.
file_list_spec=$lt_file_list_spec_CXX

# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action_CXX

# The directories searched by this compiler when creating a shared library.
compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX

# Dependencies to place before and after the objects being linked to
# create a shared library.
predep_objects=$lt_predep_objects_CXX
postdep_objects=$lt_postdep_objects_CXX
predeps=$lt_predeps_CXX
postdeps=$lt_postdeps_CXX

# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=$lt_compiler_lib_search_path_CXX

# ### END LIBTOOL TAG CONFIG: CXX
_LT_EOF

 ;;
    "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
  # Strip MF so we end up with the name of the file.
  mf=`echo "$mf" | sed -e 's/:.*$//'`
  # Check whether this is an Automake generated Makefile or not.
  # We used to match only the files named `Makefile.in', but
  # some people rename them; so instead we look at the file content.
  # Grep'ing the first line is not enough: some people post-process
  # each Makefile.in and add a new line on top of each file to say so.
  # Grep'ing the whole file is not good either: AIX grep has a line
  # limit of 2048, but all sed's we know have understand at least 4000.
  if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
    dirpart=`$as_dirname -- "$mf" ||
$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$mf" : 'X\(//\)[^/]' \| \
	 X"$mf" : 'X\(//\)$' \| \
	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$mf" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
  else
    continue
  fi
  # Extract the definition of DEPDIR, am__include, and am__quote
  # from the Makefile without running `make'.
  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
  test -z "$DEPDIR" && continue
  am__include=`sed -n 's/^am__include = //p' < "$mf"`
  test -z "am__include" && continue
  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
  # When using ansi2knr, U may be empty or an underscore; expand it
  U=`sed -n 's/^U = //p' < "$mf"`
  # Find all dependency output files, they are included files with
  # $(DEPDIR) in their names.  We invoke sed twice because it is the
  # simplest approach to changing $(DEPDIR) to its actual value in the
  # expansion.
  for file in `sed -n "
    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
    # Make sure the directory exists.
    test -f "$dirpart/$file" && continue
    fdir=`$as_dirname -- "$file" ||
$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$file" : 'X\(//\)[^/]' \| \
	 X"$file" : 'X\(//\)$' \| \
	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$file" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
    { as_dir=$dirpart/$fdir
  case $as_dir in #(
  -*) as_dir=./$as_dir;;
  esac
  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
    as_dirs=
    while :; do
      case $as_dir in #(
      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
      *) as_qdir=$as_dir;;
      esac
      as_dirs="'$as_qdir' $as_dirs"
      as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
      test -d "$as_dir" && break
    done
    test -z "$as_dirs" || eval "mkdir $as_dirs"
  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
echo "$as_me: error: cannot create directory $as_dir" >&2;}
   { (exit 1); exit 1; }; }; }
    # echo "creating $dirpart/$file"
    echo '# dummy' > "$dirpart/$file"
  done
done
 ;;

  esac
done # for ac_tag


{ (exit 0); exit 0; }